|
- Cars must be built following the instruction manual with original Tamiya
parts unless stated below. All parts must be used as supplied in the box
and/or cut as outlined. Any Tamiya TA03/TB01 chassis is permitted; plastic
tubs only! No carbon or FRP chassis.
- Only Tamiya spare parts and hop up options designed for that type of car
and are commercially available via The Hobby Company Limited are allowed.
- Battery is limited to 7.2v six subC sized pack, which must be commercially
available at the time of the meeting.
- Radio must be X'tal changeable. Three X'tals must be available for all
meetings.
- Only the approved motor supplied by The Hobby Company Limited can be used.
This costs £20 payable with your first entry fee. Wires can be removed to connect to an electronic speed controller. Motor
brushes may be replaced with the 'Euro' brushes as used in the Euro Stock
motor. Any attempt to modify or to influence the ability of the motor eg
soldering the tags, etc, is not permitted.
- The use of sensors fitted to wheels, lay-shafts or suspension units to aid
traction control or active suspension is prohibited. Gyro devices are
prohibited.
- Tyres must be Tamiya rally block type tyres. Any Tamiya tyre insert is
allowed.
- Minimum ride height will be enforced; this height is 5mm.
- Minimum weight of the car ready to run is 1,600g.
- Only Tamiya servo savers, track rods and ball ends may be used.
- The race will be 5 minutes duration with the time to complete the last
lap.
- A transponder mount may be added providing it does not destroy the
original form of the car.
- Any pinion may be used providing that it is no larger than that which the
car is designed to accept. NB 0.4 mod gears are not allowed.
- Any other issues not clarified shall be handled at the discretion of the
race organiser.
View the rules in Adobe
Acrobat for print friendly format. Not got Adobe Acrobat Reader? Download here
for free by clicking on their logo.
|
|
