Front End

Outer hole on shock tower, Outer hole on wishbone, Teflon pistons with 40wt oil and one o-ring inside, White springs, Set to a 5mm ride height, Front roll bar: Yellow, Front tyres: new 24 mm type A with std kit insert, Std camber link positions, 1.5 degrees of camber, 1 degree of toe out.

Rear End

Middle hole on shock tower, Outer hole on wishbone, Teflon pistons and 40wt oil with one o-ring, Blue springs, Set to 5.5mm ride height, No roll bar, Tyres: New type A with standard insert, Std camber link positions, 2 degrees of camber.

Electrics, etc.

Speedo LRP V7.1 KO fet servo 2015, Reedy 3000 batteries, Tamiya Dynarun motor geared on 128 spur and 40 pinion, Futaba 3vc transmitter, Shell was a Honda NSX 2000 shell with the supplied wing.

With thanks to his sponsors CML, Yokomo, Reedy, BRM and Cheshire Models